Thanks for reading this post. I hope you enjoyed and Iโve inspired you to give this card a try for yourself. Leave comments or questions below or feel free to email.
Hello friends. Want to make an impactful background with little effort. Try using an emboss resist technique. You can stamp or stencil the embossing. Either way the results are impressive!
I stamped the images from Stampin’ Up!’s Warm & Toasty Stamp Set (retired) onto Neenah 110lb Classic Crest Cardstock 8.5 X 11″ with Memento Tuxedo Black Ink. I colored them with Copic Markers. I used YG03, YG17 & YG67, C1, C3 & C5 for the sleigh; N1, N2 & N4, R20 & R46 for the bunnies; R46 & R32, C1 & C3, YG03 & YG17, R20 for the mice; and R17 & R46, Y06 & Y17 for the ornaments.
Thanks for reading this post. I hope you enjoyed and Iโve inspired you to give this card a try for yourself. Leave comments or questions below or feel free to email.
Hello friends. Have you ever tried using your dies to emboss or stencil your backgrounds?!? It’s super easy and you can make quick cards using these techniques. I created three cards demonstrating these techniques using the Catherine Pooler Retro Ornament Dies. Let me show you how easy they are to make. For more stenciled backgrounds using dies check out my previous post.
I took the ornament dies from the Catherine Pooler Designs Retro Ornament Dies and embossed the background panel. For my Sizzix Big Shot machine I used the following sandwich from the bottom up: 1.) Multipurpose Platform, 2.) Cutting Plate, 3.) Emboss mat, 4.) Paper. 5.) Die face down, and 6.) Cutting Plate. Check your machines guide for the proper snadwich. I also added additonal paper to deepen the embossing a bit.
For this third card, I made a fun shaker pocket card. I cut a piece of Stampin’ Up! Melon Mambo 8-1/2 x 11″ Cardstock (retired) to 5-1/2 x 8-1/2″ and scored at 4-1/4″ to create a card base and piece of patter paper from my stash to 4-1/4 x 5-1/2โ for the inside of the shaker panel.
I cut a piece Acetate slightly larger than my back panel. then used double sided tape to adhere three sides of the acetate to the back of the panel, creasing the edges. I filled the pocket with a variety of flat sequins and stars and sealed the last side of the pocket. I adhered the panel to the card and then die cut a frame from Neenah 110lb Classic Crest Cardstock 8.5 X 11″ using the Spellbinders Nestabilities A2 Card Creator Dies Matting Basics A 4-1/4 x 5-1/2″ and 4-5/8 x 4-7/8″.
Thanks for reading this post. I hope you enjoyed and Iโve inspired you to give these cards a try for yourself. Leave comments or questions below or feel free to email.
Hello friends. It’s time to make some holiday cards. Starting things off with some super easy cards using dies to emboss backgrounds. It’s a super easy technique and produces some really cool results. You can use the embossed or debossed side as well.
For the first card, I cut a piece of Neenah 110lb Classic Crest Cardstock 8.5 X 11″ to 5-1/2 x 8-1/2″ and scored at 4-1/4″ to create a card base and piece of Neenah 80lb Classic Crest Cardstock 8.5 X 11″ to 4 x 5-1/4โ for the top panel.I used the Stampin’ Up! So Many Snowflakes dies (retired) to emboss the background. I followed the sandwich for wafer dies on my diecut machine (Sizzix Big Shot) and added another piece of cardstock to get a deeper impression. Play around with your sandwich and add a shim if necessary to get the desired raised effect.
I die cut snowflakes from Neenah 110lb Classic Crest Cardstock 8.5 X 11″, Simon Says Stamp 6×6 Silver Glitter Cardstock and Stampin; Up! 12 x 12 Balmy Blue Glimmer Paper (retired) as well as some bright pink glitter paper from my stash. I used the Hero Arts Fancy Snowflake Die (discontinued), Stampin’ Up! So Many Snowflakes (retired) and Stampin’ Up! Colorful Seasons.
I die cut snowflakes from Neenah 110lb Classic Crest Cardstock 8.5 X 11″, Stampin; Up! 12 x 12 Balmy Blue Glimmer Paper (retired) as well as some pale and bright pink glitter paper from my stash. I used the Hero Arts Fancy Snowflake Die (discontinued), Stampin’ Up! So Many Snowflakes (retired) and Stampin’ Up! Colorful Seasons.
I die cut snowflakes from Neenah 110lb Classic Crest Cardstock 8.5 X 11″ as well as some bright pink glitter paper from my stash. I used the Catherine Pooler Designs Delicate Snowflake Die (discontinued), Stampin’ Up! So Many Snowflakes (retired) and Stampin’ Up! Colorful Seasons.
I stamped the sentiment from the Stampin’ Up! Joy to the World Paper Pumpkin Stampset (retired) directly onto the card with Catherine Pooler Designs Black Jack Ink.
Thanks for reading this post. I hope you enjoyed and Iโve inspired you to give these cards a try for yourself. Leave comments or questions below or feel free to email.
Hi friends. I needed a birthday card for my dad and even though my dad is completely fine with whatever type of card he receives I wanted to keep it kinda masculine bit modern. So I chose a geometric stencil, modeling paste and a few distress inks and made this easy background. Let me show you how easy it is to make!
Thanks for reading this post! I hope you enjoyed and Iโve inspired you to make this easy masculine birthday card yourself! If you want to share you creations with me tag me on instagram @kittieslovecrafting. Leave comments or questions below or feel free to email me.
Thanks for reading this post! I hope you enjoyed and Iโve inspired you to make these cute Halloween gift bags yourself! If you want to share you creations with me tag me on instagram @kittieslovecrafting. Leave comments or questions below or feel free to email me.
Limited Edition Simon Says Stamp Home Sweet Haunted Home Halloween Card Kit is full of tons of goodies to make cute Halloween cards and gift bags. While the kit is now sold out, you can buy most of the items in the kit seperately. The list below has all the links. Stay tuned for the next post featuring the gift bags!
I cut a sentiment and image from the Carta Bella Hocus Pocus 6×6 inch paper pack cut apart pages as well as two strips measuring 1/2 x 3″ and 1 x 3″ to add to the top of the ghost panel.
Thanks for reading this post! I hope you enjoyed and Iโve inspired you to make these Halloween cards yourself! If you want to share you creations with me tag me on instagram @kittieslovecrafting. Leave comments or questions below or feel free to email me.
Hi friends. Here’s another adorable scene card using the Pumpkin House Die from Lawn Fawn. Itโs such a fun die set. There are so many occasions for which it can be used, Maybe a winter pumpkin?? Christmas??
I masked off the moon by punching out a 1-1/4″ circle from post it paper. I used Tim Holtz Seedless Preserves, Villainous Potion, and Chipped Sapphire Distress Oxide Inks. Then removed the mask and added Scattered Straw Distress Oxide Ink around the moon which blended with the sky colors and created a cool spooky effect. This was totally unplanned but worked out in my favor. I also sprayed water on the panel to further distress it.
Thanks for reading this post! I hope you enjoyed and Iโve inspired you to make this Halloween scene card yourself! If you want to share you creations with me tag me on instagram @kittieslovecrafting. Leave comments or questions below or feel free to email me.
Hi friends. Using the emboss resist technique to create a background is super easy and creates a very high contrast, impactful visual. Let me show you how easy this was to create.
I used YR16, YR18, & YR09, N2, N6 & N8 for the pumpkins; G94 & G99 for the leaves; BV11, BV08, V25 & V28 for the truck bed; Y13 & Y17 for the truck head lights; C1, C3, C5, C7, & C9 for the metal on the truck; YG05, YG17 & YG67 for the license plate; and BG000 & 0 for the truck windows.
Thanks for reading this post! I hope you enjoyed and Iโve inspired you to make this cute Halloween card yourself! If you want to share you creations with me tag me on instagram @kittieslovecrafting. Leave comments or questions below or feel free to email me.
I stamped the images from the Honey Bee Stamps Big Pickup Tailgate 6×6 Stamp Set and the Honey Bee Loads of Fall Stamp Set onto Neenah 110lb Classic Crest Cardstock with Memento Tuxedo Black Ink. I colored them with Copic markers. I used Y13, Y18, E15, E37 & E29, YG13, YG17 & G07 for the sunflowers; Y00, Y13, Y18, YG01, YG25, E29, E37 & E79 for the corn; BG11, BG63, BG18 & BG49 for the truck bed; BG000 & 0 for the windows; C1, C3, C5, C7, & C9 for the metal; Y02 & Y13 for lights; R05 & R46, YG01 & YG25, E37, E79 & E25 for the apples; Y13 & Y17 for license plate. And diecut them with the coordinating dies.
Thanks for reading this post! I hope you enjoyed and Iโve inspired you to make this cute Fall card yourself! If you want to share you creations with me tag me on instagram @kittieslovecrafting. Leave comments or questions below or feel free to email me.