Cards, Fall, Halloween

Halloween House Cards featuring Honey Bee Stamps Haunted House Add-on Dies

I’m back with another adorable card featuring the House Builder Card Base Dies from Honey Bee Stamps!!! This time I created Halloween houses which was so much fun! I love Halloween (always been my favorite holiday since I was a kid) so I have to make as many cards as possible! And yes I DO send out Halloween cards to family and friends, whether they have kids or not. Adults are entitled to some Halloween magic too, am I right?!? But this year especially I am making a point of sending out as many holiday cards as possible.

For the first card, I started by diecutting the house card base 2x from the House Builder Card Dies, chimney (from Honey Cuts Gingerbread House Add-on), and one gable from Stampin’ Up! Elegant Eggplant 8-1/2 x 11″ Cardstock (retired), the roof and stairs from Simon Says Stamp Card Stock 100# Green Apple, and the gable roof from Simon Says Stamp 100# Black Card with the House Builder Card Base Dies and Honey Cuts Haunted House Add-on.

I adhered the two houses with the pre-scored strip that comes in the House Builder Card Base Dies to create the card base. Be sure to use double-sided tape or something very strong so they don’t come apart. I adhered the roof and diecut out the windows from the front piece then added Tim Holtz Ranger Black Soot Distress Ink to everything. I also added Tim Holtz Ranger Peeled Paint Distress Ink. In fact everything except the ghosts and pumpkins had Tim Holtz Ranger Black Soot Distress Ink added to them to age them.

I used Simon Says Stamp 100# Black Card for the door and the bats, Simon Says Stamp Slate 8-1/2″ X 11″ Cardstock for the door gable, and fence, Simon Says Stamp Fog 8-1/2″ X 11″ Cardstock for the door handle, grave stones and webs (from Papertrey Ink – Tiny Town: Spookville Die), Neenah Classic Crest, 80lb Solar White for the ghosts, Stampin’ Up! Soft Suede 8-1/2″ X 11″ Cardstock for the wood and tree, and Stampin Up! Pumpkin Pie 8-1/2 x 11″ Cardstock for the pumpkins. I backed all the windows with Simon Says Stamp Slate 8-1/2″ X 11″ Cardstock. TIP: To hide the cardstock pieces behind the windows, I diecut another house from Stampin’ Up! Elegant Eggplant 8-1/2 x 11″ Cardstock (retired) and adhered it to back of the card front. I added some shimmer to the bats and the ghosts with a Spectrum Noir CLEAR OVERLAY Sparkle Pens.

On the inside of the card, I diecut another house from Neenah Classic Crest, 80lb Solar White, trimmed it down and adhered it to the card base. Then stamped the sentiment from the Queen and Company Halloween Hoopla stampset with Simon Says Stamp GREEN APPLE Ink. I added a web, diecut from Simon Says Stamp Slate 8-1/2″ X 11″ Cardstock and a pumpkin.


For the second card, I started by diecutting the house card base 2x, chimney (from Honey Cuts Gingerbread House Add-on), and one gable from Simon Says Stamp 100# Black Card, the roof, window shutters and stairs from Stampin’ Up! Elegant Eggplant 8-1/2 x 11″ Cardstock (retired) and the gable roof from Simon Says Stamp Card Stock 100# Green Apple with the House Builder Card Base Dies and Honey Cuts Haunted House Add-on.

I adhered the two houses with the pre-scored strip that comes in the House Builder Card Base Dies to create the card base. Be sure to use double-sided tape or something very strong so they don’t come apart. I adhered the roof and diecut out the windows from the front piece then added Tim Holtz Ranger Black Soot Distress Ink to everything. In fact everything except the ghosts and webs had Tim Holtz Ranger Black Soot Distress Ink added to them to age them.

I used Simon Says Stamp Card Stock 100# Green Apple for the door, Simon Says Stamp Slate 8-1/2″ X 11″ Cardstock for the door gable, the wood planks and the cross gravestone, Simon Says Stamp Fog 8-1/2″ X 11″ Cardstock for the door handle, grave stones, and fence, Neenah Classic Crest, 80lb Solar White for the ghosts and webs (from Papertrey Ink – Tiny Town: Spookville Die), Simon Says Stamp 100# Black Card for the bats and Stampin Up! Pumpkin Pie 8-1/2 x 11″ Cardstock for the pumpkins. I backed all the windows with Simon Says Stamp Fog 8-1/2″ X 11″ Cardstock and the pumpkins with Simon Says Stamp 100# Black Card. I added some shimmer to the bats and the ghosts with a Spectrum Noir CLEAR OVERLAY Sparkle Pens and some Wiggly Eyes inside the windows.

I diecut another house from Simon Says Stamp 100# Black Card and adhered it to back of the card front.

On the inside of the card, I diecut another house from Neenah Classic Crest, 80lb Solar White, trimmed it down and adhered it to the card base. Then stamped the sentiment from the Queen and Company Halloween Hoopla stampset with Memento Black Ink. I added a web, diecut from Neenah Classic Crest, 80lb Solar White,and three grave stones die cut from Simon Says Stamp Slate 8-1/2″ X 11″ Cardstock.


Supplies

Thanks for reading this post. I hope you enjoyed and I’ve inspired you to try out these adorable House Builder dies and make some fun cards and gift boxes! Leave comments or questions below or feel free to email me.

Cards, Halloween, Holidays 2019

Halloween Cards Day #6

Happy almost Halloween everyone!! Halloween is just around the corner so here is one last card to wrap up this series. Hope you’ve enjoyed and got some inspiration. So I’m rounding off this series with some more Lawn Fawny goodness. I’m sure by now you’ve figured out that I love Lawn Fawn stamps.😀😀

This one features the Lawn Fawn’s Happy Haunting and Pick of the Patch stampsets. I began by cutting a piece of Simon Says Stamp Black Cardstock to 5-1/2 x 8-1/2″and scored at 4 1/4″ to create a card base and a piece to 4 x 5-1/4″ for the top panel.

I stamped and heat embossed the house, tree, moon, bats from the Lawn Fawn Happy Haunting stampset with Versamark and Wow White Embossing Powder onto the black panel and colored the windows of the house with a yellow Prismacolor Pencil. I stamped several of the pumpkins from the Lawn Fawn Pick of the Patch and the small and medium ghosts from the Lawn Fawn Happy Haunting stampsets with Memento Tuxedo Black Ink onto some Neenah 110lb Classic Crest Cardstock 8.5″X11″. I colored the pumpkins with Copics in YR04, YR09, YG25, G94 and R81 (for cheeks) and the ghosts with C1, R20 and colorless I diecut them with their coordinating dies and then added some highlights with a Uni-ball Signo white Gel Pen.

I used some white acrylic paint to add some splatters to the black panel to give the sky some dimension. I diecut the Spooky Fence Border from Lawn Fawn from some black DCWV Glitzy Glitter Cardstock and the “grassy” area I used Stampin’ Up! Brights Designer Series Paper 12 x 12 (discontinued) and cut it down to 1-1/2 x 5-1/4”.

I adhered the green polka dot cardstock to the bottom portion of the card panel and then the spooky fence right above that. I adhered the ghost flat on to the card and some of the pumpkins are adhered flat and a couple I popped up with Stampin’ Dimensionals. Then I stamped the sentiment from the Lawn Fawn Pick of the Patch stampset with Catherine Pooler Orange Twist Ink onto a piece of Neenah 110lb Classic Crest Cardstock 8.5″X11″ and cut it down to 3/8 x 4-3/4. I adhered it to a piece of Simon Says Stamp Black Cardstock and trimmed it down to 1 x 4-13/16”. I popped up the sentiment using some 3M Foam Tape. To complete the card front I added some sparkle to the pumpkins with a Spectrum Noir Shimmer Pen.

For the inside of the card (I can’t leave it blank, of course!), I cut a piece of Neenah 110lb Classic Crest Cardstock 8.5″X11″ to 4 x 5-1/4″. I stamped the medium ghost from the Lawn Fawn Happy Haunting stampset in Memento Tuxedo Black Ink and a sentiment from Lawn Fawn Pick of the Patch stampset with Catherine Pooler Orange Twist Ink to match the sentiment on the front of the card. And that completed this card.

This was a super fun and as always cute card with Lawn Fawn stamps and dies. All supplies are listed and linked below as well.

Dimensions

https://linkdeli.com/widget.js?1559654439292

Thanks for reading stopping by and I hope I’ve inspired you to go make some Halloween cards of your own. Leave comments or questions below or feel free to email me.

Halloween

Halloween Cards Day #1

Halloween is just 7 weeks away but who’s counting?!? Umm. Me! I love Halloween even if I don’t get to dressed up anymore. It’s still sooo much fun!!!!

So I’m kicking off my Halloween series with an easy card. Black cardstock, stamps, embossing powder and some colored pencils is all you really need. So grab your favorite Halloween stamps and let’s begin!

I started with a panel of Simon Says Stamp Black Cardstock cut to 5 1/2 x 4 1/4″. When your whole image is going to be heat embossed, it’s a good idea to start with a piece of paper/cardstock that is slightly larger than you will need. This gives room for errors. God knows I need it! LOL.

I pulled out one my new favorite Halloween stampsets, the Spooky Hollow by Catherine Pooler Designs then using my MISTI, I laid out the stamps I needed and mapped out my scene.

I prepped the surface with an anti-static bag (especially important on dark cardstocks) and stamped the house, the tree, one bat and the moon first, using Versamark clear embossing ink and Wow white embossing powder. Next, I reapplied some more anti-static powder and stamped and heat embossed the second bat and the fence which I had to stamp 3-4 times to get a continuous fence. Then stamped and white heat embossed the sentiment onto a scrap of Simon Says Stamp Black Cardstock. Before I diecut this panel out, I added some white dots with my Uni-Ball Signo Broad Point White Gel Pen to the sky. This can also be done with paint splatters. I just wasn’t in the mood for the mess that day.

Once all the stamping was done, I diecut the panel using the largest die from Lawn Fawn’s Small Stitched Rectangle Dies which measures 3-3/4 x 5″.

Time to color the house… You can certainty leave it uncolored but I wanted it to stand out and I was curious to see how my Prismacolor Pencils looked on the black cardstock.

I used two greens for the roof and door, two purples for the house, two greys for the porch floor, a yellow for the window shutters and a yellow orange for the inside of the window, and finally two reddish browns for the wood boards. Prismacolor Pencils have a rich pigment so they show up on dark cardstock nicely. Then I fussycut the sentiment and adhered it using Stampin’ Dimensionals.

I diecut a panel of some very old Halloween pattern paper from my stash using the largest die from Lawn Fawn’s Large Stitched Rectangles which measures to 5-1/2 x 4-1/4″. I distressed it a bit using Ranger Black Soot Distress Ink. Then adhered the black panel onto it and that to a card base (Simon Says Stamp Blue Violet 100lb Cardstock) measuring 5-1/2 x 8-1/2″and scored at 4 1/4″.

Lastly I finished off the card with some Nuvo Glitter Drops in White Blizzard. But I couldn’t leave the inside empty so cut a panel of Neenah 110lb Classic Crest Cardstock 8.5″X11″ to 8 1/2 x 5 1/2″ and adhered a piece of the same Halloween pattern paper, measuring 3/4 x 5-1/4″ to the bottom edge, which I also distressed with Black Soot Distress Ink.

But I didn’t stop there. I was having too much fun with this card so I used the fence stamps from Spooky Hollow by Catherine Pooler Designs and white heat embossed it along the bottom edge of a black Euroflap Envelope.

Dimensions

Supplies

Thanks for stopping by and I hope I’ve inspired you to start making your Halloween cards. Leave comments or questions below or feel free to email me.