Distress Ink Techniques, Easter, Holidays 2020, Multimedia, Tags

Distressed Easter Tags featuring Simon Says Stamp’s Hello Easter Stampset

Happy Saturday friends! Hope you are all doing well and are safe. To go along with the cards in my previous post using the Hello Easter stampset from Simon Says Stamp, I decided to make some multimedia tags. I also dug up some items from my stash that I forgot I had (yeah that’s how old they are. LOL, Anyone else have this problem?) to use on the tags.

For the first tag, I started by adding distress ink to a Ranger Inkssentials Surfaces Manila Craft Tag (6-1/4 by 3-1/4-Inch). I used Tim Holtz MERMAID LAGOON Distress Ink and Tim Holtz SEEDLESS PRESERVES Distress Ink. I sprayed some water droplets using the Ranger Tim Holtz Distress Sprayer. Then I stamped the Catherine Pooler Composition Notebook Background Stamp with Ranger Archival JUMBO JET BLACK Ink. I didn’t stamp the whole background; I stamped a few areas. On the back of the tag, I added Simon Says Stamp 100lb COTTON CANDY Card Stock and used some of the same distress inks to add some color, sprayed some water and again used the Catherine Pooler Composition Notebook Background Stamp with Ranger Archival JUMBO JET BLACK Ink to add some texture. I set that aside and got to stamping and coloring the images.

I stamped the bunny, basket, tulips and daffodils from the Hello Easter stampset from Simon Says Stamp onto a piece of Neenah 110lb Classic Crest Cardstock 8.5 X 11″ with Memento Tuxedo Ink.

I colored them with COPICS. I used C000, C1, and 0 for the bunny and R81 and R85 for its ears; Y06, Y13 and Y18 for the bunny’s bow; YG06, YG07, and YG09, YR07 and YR16 for the egg the bunny holds; YR07, YR16 and R29 for one tulip; BG01, BG02, and BG05 for the second tulip; Y06, Y13 and Y18 for the daffodils and YG06, YG07, and YG09 for the stems; and Y00, Y06, and Y21 for the basket, V04, V06 and V09, YR07, YR16 and R29, BG01, BG02, and BG05 for the eggs inside the basket, R29 and R32 for the basket bow. Once I finished coloring the images, I fussycut them all out.

I stamped “Hello” with Versamark Ink and WOW OPAQUE BRIGHT WHITE Super Fine Embossing Powder, making sure to prep the surface with my EK Success Powder Tool beforehand. I added two strips of Doodlebug’s Fancy Frills ‘Sugar & Spice’ Adhesive Border to the bottom of the tag. I adhered the images to the tag, using 3M Foam Tape behind the basket to pop it up. I added some shimmer to the bunny’s bow, the flowers and the eggs in the basket with my Spectrum Noir Clear Overlay Sparkle Pen and I added a yellow and aqua piece of grosgrain ribbon to the hole in the tag. And that completes the tag.


For the second tag, I started by adding distress ink to a Ranger Inkssentials Surfaces Manila Craft Tag (6-1/4 by 3-1/4-Inch). I used Tim Holtz Mowed Lawn Distress Ink, Tim Holtz Broken China Distress Ink, Tim Holtz Mermaid Lagoon Distress Ink, and Tim Holtz Peacock Feathers Distress Ink. I sprayed some water droplets using the Ranger Tim Holtz Distress Sprayer.

Next, I used Simon Says Stamp Stencil WAVES and Tim Holtz Chipped Sapphire Distress Oxide Ink to add waves to the background. Again, I didn’t add it to all the background. On the back of the tag, I added Simon Says Stamp 100lb Mint Card Stock and used some of the Tim Holtz Chipped Sapphire Distress Oxide Ink to add some color to the edges. I set that aside and got to stamping and coloring the images.

I stamped the ducky with the umbrella and the large Easter egg from the Hello Easter stampset from Simon Says Stamp onto a piece of Neenah 110lb Classic Crest Cardstock 8.5 X 11″ with Memento Tuxedo Ink.

I colored them with COPICS. I used Y06, Y13 and Y18 for the ducky body, YR07 and YR16 for the feet and beak and R81 for the cheeks, V04, V06 and V09 for the bow; R32, R37 and R29 for the umbrella and V04, V06 and V09 for the umbrella bow; Y06, Y13 and Y18, YR07 and YR16 for the medallion; R81 and R85, BG000, BG01 and BG02 for the large egg, and YR07, YR16 and R29 for the egg’s bow. Once I finished coloring the images, I fussycut them all out.

I cut a piece of scallop sticker from Doodlebug’s Fancy Frills ‘Lily White’ Adhesive Border and colored it with Tim Holtz Faded Jeans Distress Spray Stain and Tim Holtz Hickory Smoke Distress Spray Stain. Once it was dry I adhered it to the right side of the tag. I stamped “Hello” with Versamark Ink and WOW OPAQUE BRIGHT WHITE Super Fine Embossing Powder, making sure to prep the surface with my EK Success Powder Tool beforehand. I adhered the two images to the tag and found some paper butterflies from my stash which I inked with distress inks and adhered to the tag. Then I added some shimmer to the images with my Spectrum Noir Clear Overlay Sparkle Pen and Nuvo Drops in Ivory Seashell. To finish off this tag, I added a piece of Lawn Fawn Lime Single Cord Twine and May Arts PINK Baker’s Twine Twisted Ribbon.

Supplies

Thanks for reading this post. I hope you enjoyed and I’ve inspired you to give these tags a try for yourself. Have a great Easter! Leave comments or questions below or feel free to email.

Easter, Holidays 2020, Spring

2 Cards Featuring Simon Says Stamp’s Hello Easter Stampset

Happy Monday friends! Easter is fast approaching and even though we may not gather with all our families this year, we can still share happy sentiments with our loved ones by sending cards and gifts. We are going to have to get creative this year folks! Maybe instead of a community Easter Egg Hunt, try one in your back yard or inside your house. Decorate some cookies with your kids. For thedr two cards I used the very cute Hello Easter stampset from Simon Says Stamp. I like that the images are nice and big so they are easy to color and fill up more space on a card.

For the first card I started by cutting a piece of Simon Says Stamp Card Stock 100# 8 1/2 x 11″ Ivory to 5-1/2 x 8-1/2″ and scored at 4-1/4″ for a card base. Then I used the Tags, Etc. Dies by Catherine Pooler to cut a piece of Canson Montval Acid-Free Cold Press Watercolor Paper, 140 lb, 18 X 24 in, Natural White as well as a piece of Neenah 110lb Classic Crest Cardstock 8.5 X 11″. Next I used the Lawn Fawn Simple Grassy Hillsides Lawn Cuts Dies to cut out a grassy hillside from the piece of Neenah 110lb Classic Crest Cardstock 8.5 X 11″ that already has a scallop edge. I made it about 2-1/4″ in height so this piece will measure 2-1/4 x 4″.

Card front

Once everything was diecut, it was time to ink the background. I used the My Favorite Things Mini Cloud Edges Mix-ables Stencil in combination with Tim Holtz Tumbled Glass Distress Oxide Ink and Tim Holtz Salty Ocean Distress Oxide Ink and my Ink Blenders to add clouds to the top 2/3 of the panel. I sprayed some water using my Tim Holtz Distress Sprayer by Ranger to add texture. Once it dried, I ran the panel through a diecutting machine using Taylored Expressions Raindrops Embossing Folder to add some raindrops.

Then I used Tim Holtz TWISTED CITRON Distress Oxide Ink and Tim Holtz Mowed Lawn Distress Oxide Ink for the grassy hillside. I again used the Tim Holtz Distress Sprayer by Ranger to add water droplets and create more interest. I let that dry and then adhered both pieces to the card base. I popped up the grassy hillside with 3M Foam Tape.

I stamped the ducky, large Easter egg, and the chickadee with 3 eggs from all the images I needed from Hello Easter stampset from Simon Says Stamp and the two eggs from SSS Some Bunny (not available anymore I believe) with Memento Tuxedo Black Ink onto Neenah 110lb Classic Crest Cardstock 8.5 X 11″. Once dried, I colored the images with COPIC markers. I used BG000 + 0 Blender for mini eggs and YG05 + YG07 for the grass; Y06 and Y18 for the both chicks; RV000 + RV11 for the chick’s bow; YR12 + YR16 for the chock beaks and feet; V06 + V09 for the umbrella top and BV08 + V09 for the umbrella underside, YR12 +YR07 + YR16 for the umbrella bow; Y06 + Y18 for the umbrella medallion; RV09 + RV14 + RV19 for the large egg, BG000 + BG01 + BG02 for the egg’s stripes and Y06 + Y18 for the egg’s bow; YR12 + YR16 and V06 + V09 for the small polka egg; and RV000 + RV11 and BG000 + BG01 for the small stripe egg. I fussycut the images out and adhered them to the card. I added 3M Foam Tape behind the images that hung over the edge of the grass.

Card closeup

I finished the card by adding some white highlights to the images with a White Uni-Ball Signo Broad Point Gel Pen and shimmer to the umbrella bow, the chick’s bow and the small eggs with Spectrum Noir Clear Overlay Sparkle Fine Glitter Brush Pens. I also added Ranger Glossy Accents Glue Dimensional Adhesive to the small egg trio.

On the inside of the card, I stamped “Happy Easter” and the chick from the Hello Easter stampset from Simon Says Stamp with Memento Tuxedo Black Ink and colored in the chick’s feet and beak and added some pink for the cheeks.

Card inside

Dimensions


For the second card I started by cutting a piece of Simon Says Stamp Cornflower Blue 8.5×11 cardstock to 5-1/2 x 8-1/2″ and scored at 4-1/4″ for a card base. I cut a piece of light aqua scallop paper from Lawn Fawn REALLY RAINBOW SCALLOPS 6×6 Petite Paper Pack to 4-1/4 x 5-1/2″ and 2 pieces of the green plaid paper from Lawn Fawn 6×6 Perfectly Plaid Spring Petite Paper Pack to 2 x 4-1/4″ and then used one of the Lawn Fawn Simple Grassy Hillsides Lawn Cuts Dies on both. I used some Tim Holtz PEELED PAINT Distress Mini Ink to ink around the edges of the grassy edges.

I diecut a piece of Stampin’ up! Vellum 8-1/2″ X 11″ Cardstock with the My Favorite Things PEEK A BOO POLKA DOTS Die-Namics. I adhered the vellum piece to the aqua scallop paper and those to the card base.

Card front

Then I stamped the bunny, 2 tulip bundles and 1 daffodil from the Hello Easter stampset from Simon Says Stamp and the eggs from the SSS Some Bunny (not available anymore I believe) with Memento Tuxedo Black Ink onto Neenah 110lb Classic Crest Cardstock 8.5 X 11″. I colored the images with COPIC markers. I used N1 + N2 + N5 for the bunny, R20 + R32 for the bunny ears, cheeks and nose, R05 + R08 + R59 for the bunny’s bow; R20 + R32 and R32 + R37 for the tulips; and R08 + R59 and Y06 + Y18 for the daffodil. I fussycut all the images.

Card closeup

Using a stamp platform I stamped “Happy Easter” with Memento Tuxedo Black Ink onto one of the green plaid grassy hillsides. Then I prepped the piece with my EK Success Antistatic Powder Tool Applicator and restamped the sentiment with Versamark Ink and added WOW CLEAR MATTE DULL Embossing Powder.

I adhered one piece of the grassy areas directly onto the card with Tombow Mono Multi Liquid Glue and the one with the sentiment with some 3M Foam Tape. I then adhered all the images, adding 3M Foam Tape behind the striped egg. I finished it off by adding to Ice Blue Mirror Pin Stripe Peel-Off Stickers by Love From Lizi to the top of the card.

For the inside of the card, I cut a piece of Neenah 110lb Classic Crest Cardstock 8.5 X 11″ to 4 x 5-1/4″ and adhered it to the inside of the card. I cut a piece of the aqua scallop pattern paper from Lawn Fawn REALLY RAINBOW SCALLOPS 6×6 Petite Paper Pack to 1 x 4″ and the green plaid pattern paper from Lawn Fawn 6×6 Perfectly Plaid Spring Petite Paper Pack to 3/4 x 4″ and adhered them at the bottom of the panel. Lastly, I stamped the bunny with Memento Tuxedo Black Ink and colored his cheeks. And that completes this card.

Card inside

Dimensions

Supplies

Thanks for reading this post. I hope you enjoyed and I’ve inspired you to give these cards a try for yourself. Have a great Easter! Leave comments or questions below or feel free to email.