Cards, Fall, Halloween

Halloween House Cards featuring Honey Bee Stamps Haunted House Add-on Dies

I’m back with another adorable card featuring the House Builder Card Base Dies from Honey Bee Stamps!!! This time I created Halloween houses which was so much fun! I love Halloween (always been my favorite holiday since I was a kid) so I have to make as many cards as possible! And yes I DO send out Halloween cards to family and friends, whether they have kids or not. Adults are entitled to some Halloween magic too, am I right?!? But this year especially I am making a point of sending out as many holiday cards as possible.

For the first card, I started by diecutting the house card base 2x from the House Builder Card Dies, chimney (from Honey Cuts Gingerbread House Add-on), and one gable from Stampin’ Up! Elegant Eggplant 8-1/2 x 11″ Cardstock (retired), the roof and stairs from Simon Says Stamp Card Stock 100# Green Apple, and the gable roof from Simon Says Stamp 100# Black Card with the House Builder Card Base Dies and Honey Cuts Haunted House Add-on.

I adhered the two houses with the pre-scored strip that comes in the House Builder Card Base Dies to create the card base. Be sure to use double-sided tape or something very strong so they don’t come apart. I adhered the roof and diecut out the windows from the front piece then added Tim Holtz Ranger Black Soot Distress Ink to everything. I also added Tim Holtz Ranger Peeled Paint Distress Ink. In fact everything except the ghosts and pumpkins had Tim Holtz Ranger Black Soot Distress Ink added to them to age them.

I used Simon Says Stamp 100# Black Card for the door and the bats, Simon Says Stamp Slate 8-1/2″ X 11″ Cardstock for the door gable, and fence, Simon Says Stamp Fog 8-1/2″ X 11″ Cardstock for the door handle, grave stones and webs (from Papertrey Ink – Tiny Town: Spookville Die), Neenah Classic Crest, 80lb Solar White for the ghosts, Stampin’ Up! Soft Suede 8-1/2″ X 11″ Cardstock for the wood and tree, and Stampin Up! Pumpkin Pie 8-1/2 x 11″ Cardstock for the pumpkins. I backed all the windows with Simon Says Stamp Slate 8-1/2″ X 11″ Cardstock. TIP: To hide the cardstock pieces behind the windows, I diecut another house from Stampin’ Up! Elegant Eggplant 8-1/2 x 11″ Cardstock (retired) and adhered it to back of the card front. I added some shimmer to the bats and the ghosts with a Spectrum Noir CLEAR OVERLAY Sparkle Pens.

On the inside of the card, I diecut another house from Neenah Classic Crest, 80lb Solar White, trimmed it down and adhered it to the card base. Then stamped the sentiment from the Queen and Company Halloween Hoopla stampset with Simon Says Stamp GREEN APPLE Ink. I added a web, diecut from Simon Says Stamp Slate 8-1/2″ X 11″ Cardstock and a pumpkin.


For the second card, I started by diecutting the house card base 2x, chimney (from Honey Cuts Gingerbread House Add-on), and one gable from Simon Says Stamp 100# Black Card, the roof, window shutters and stairs from Stampin’ Up! Elegant Eggplant 8-1/2 x 11″ Cardstock (retired) and the gable roof from Simon Says Stamp Card Stock 100# Green Apple with the House Builder Card Base Dies and Honey Cuts Haunted House Add-on.

I adhered the two houses with the pre-scored strip that comes in the House Builder Card Base Dies to create the card base. Be sure to use double-sided tape or something very strong so they don’t come apart. I adhered the roof and diecut out the windows from the front piece then added Tim Holtz Ranger Black Soot Distress Ink to everything. In fact everything except the ghosts and webs had Tim Holtz Ranger Black Soot Distress Ink added to them to age them.

I used Simon Says Stamp Card Stock 100# Green Apple for the door, Simon Says Stamp Slate 8-1/2″ X 11″ Cardstock for the door gable, the wood planks and the cross gravestone, Simon Says Stamp Fog 8-1/2″ X 11″ Cardstock for the door handle, grave stones, and fence, Neenah Classic Crest, 80lb Solar White for the ghosts and webs (from Papertrey Ink – Tiny Town: Spookville Die), Simon Says Stamp 100# Black Card for the bats and Stampin Up! Pumpkin Pie 8-1/2 x 11″ Cardstock for the pumpkins. I backed all the windows with Simon Says Stamp Fog 8-1/2″ X 11″ Cardstock and the pumpkins with Simon Says Stamp 100# Black Card. I added some shimmer to the bats and the ghosts with a Spectrum Noir CLEAR OVERLAY Sparkle Pens and some Wiggly Eyes inside the windows.

I diecut another house from Simon Says Stamp 100# Black Card and adhered it to back of the card front.

On the inside of the card, I diecut another house from Neenah Classic Crest, 80lb Solar White, trimmed it down and adhered it to the card base. Then stamped the sentiment from the Queen and Company Halloween Hoopla stampset with Memento Black Ink. I added a web, diecut from Neenah Classic Crest, 80lb Solar White,and three grave stones die cut from Simon Says Stamp Slate 8-1/2″ X 11″ Cardstock.


Supplies

Thanks for reading this post. I hope you enjoyed and I’ve inspired you to try out these adorable House Builder dies and make some fun cards and gift boxes! Leave comments or questions below or feel free to email me.

Cards, Fall, Halloween, Stampin' Up!

Magic in This Night Suite by Stampin’ Up! (from the new Aug-Dec Mini Catalog)

Halloween is my favorite holiday so when I saw this suite I had to get it. It has an embossing folder, stampset, dies, gorgeous paper and beautiful shimmery ribbon. What I love most is that the colors are dark. I like my Halloween cards to be distressed and spooky where possible. I like cute happy ones too but prefer gloomy and dark cards. But you can easily pair this suite with some brighter colors like gorgeous grape, pumpkin pie and granny apple green and it would be awesome too! And can we talk about the sparkle on this black glitter cardstock?!? I will definitely be using this suite again and again this year! You can find this awesome suite in the new Aug-Dec Mini Catalog.

I started this card by cutting a piece of Blackberry Bliss 8-1/2″ X 11″ Cardstock to 5-1/2 x 8-1/2″ and scored at 4-1/4″ to make a card base and one piece to 4 x 5-1/4″ which I then embossed with the new Cobwebs Embossing Folder (part of the Magic in This Night Suite). I used Tim Holtz BLACK SOOT Distress Ink and inked all around the edges of the top panel and lightly over the top of the raised areas of the cobweb. I adhered that to the card base with Tombow Mono Multipurpose Liquid Glue.

I diecut the large label from Halloween Magic Dies from the Black Glitter Paper included in the suite and the small label from Basic Black 8-1/2″ X 11″ Cardstock. Before diecutting the small label I stamped the sentiment from the Hallows Night Magic Stampset with Versarmark Ink and added White Emboss Powder and heat embossed. Make sure to use an antistatic powder before embossing. I then adhered both labels together.

I also heat embossed the large bats from the stampset onto the Basic Black 8-1/2″ X 11″ Cardstock and then diecut them as well as the tiny bats with the coordinating dies from the Halloween Magic Dies. I cut a piece of the Pretty Peacock pattern paper from the Magic in the Night 12 x 12 Designer Series Paper to 3 x 3″. I adhered that to the card panel and diecut the border from the same dieset from another pattern paer, trimmed it down to 3″ long and adhered below the pretty peacock paper square. I adhered the labels and the bats to the card. I finished it by adding some of the Iridescent Pearls included in the suite.

On the inside of the card, I cut a piece of Whisper White 8-1/2″ X 11″ Cardstock to 4 x 5-1/4″ adn adhered it on the inside. I stamped a sentiment from the Hallows Night Magic Stampset with Blackberry Bliss Ink and added three tiny bats.

Dimensions


Supplies

Thanks for reading this post. I hope you enjoyed and I’ve inspired you to try this Halloween card using this beautiful suite for yourself! Leave comments or questions below or feel free to email me. If you want to share you creations with me tag me on instagram @kittieslovecrafting. If you would like a Stampin’ Up! catalog, please email me as well. All current catalogs can be found on the right side of this post and the Stampin’ Up! page. All news and fun stuff happening at Stampin’ Up! are listed there!

Cards, Encouragement, Fourth of July, Fourth of July, Summer, Summer

Shop Your Stash Day 5: Halloween in July

Well I’m sure you have heard of Christmas in July, but have you heard of Halloween in July??? Quite frankly, I love making Halloween cards anytime of year! It’s my favorite holiday ever!!!

For this card, I started by cutting a piece of Simon Says Stamp 100# Black Card to 5-1/2 x 8-1/2″ and scored at 4-1/4″ and diecut a panel and the peekaboo panels with the Lawn Fawn Peekaboo Backdrop. I stamped the jack-o-lantern face from Papertrey Ink Pumpkin Expressions Mini Stamp Set onto a scrap of Stampin’ Up! Pumpkin Pie 8-1/2″ X 11″ Cardstock with Memento Tuxedo Black Ink, cut it to 2 x 2″ then inked up the edges with Spiced Marmalade Distress Ink. I stamped the sentiment from Stampin’ Up! (retired) Versamark Ink and WOW Embossing Powder Opaque Bright White Super Fine onto a piece of Stampin’ Up! Elegant Eggplant 8-1/2″ X 11″ Cardstock (retired), cut it to 2 x 2″ then inked up the edges with Dusty Concord Distress Oxide Ink. Then adhered both to the back of the top panel and the peekaboo windows to each respective area of the card.

I cut a piece of the aqua Lawn Fawn Perfectly Plaid Rainbow 6 x 6 Paper (not available) to 2 x 3-1/4″ and a piece of Stampin’ Up! Old Olive 8-1/2″ X 11″ Cardstock to 1-1/2 x 3-1/4″ and used the Lawn Fawn Simple Grassy Hillsides to diecut the edge. I inked the Perfectly Plaid Rainbow with Tim Holtz Distress PEACOCK FEATHERS Ink and the grass with Stampin’ Up! Old Olive Classic Stampin’ Ink and adhered the pieces together and to the back of the top panel. I cut a piece of Simon Says Stamp 100# Fog Gray Card to 2 x 3-1/4″ and created an ombre effect by using Black Soot Distress Ink.

I stamped images from Lawn Fawn’s Pick of the Patch and How You Bean Candy Corn stampset onto Neenah 110lb Classic Crest Cardstock 8.5 X 11″ with Memento Tuxedo Black Ink and colored them with COPIC markers.

I used 0 and C1, Y02 and Y06, YR12 and YR16 for the candy corn, YR16 and YR09, YG01 and YG25 for the pumpkins, Y02 and YR12 for the pumpkin guts, BV11 and BV17 for the scoop, C1 and C3, N5 and N7 for the knife and W1, W3, and W5, E15, E23, and E37 for the squirrels. I diecut the images and adhered them to their respective panels and adhered those to the back of the top panel. I used Stampin’ Dimesionals to adhere some of the images and then to the card base. Then I adhered the rest of the images around the panel.

I stamped sentiments from Lawn Fawn’s Push Here stampset with Versamark Ink and WOW Embossing Powder Opaque Bright White Super Fine to the peekaboo panels. I finished it off by adding highlights to the images with Uni-Ball Signo White Broad Point Gel Pen and VIOLET GALAXY Nuvo Drops.

On the inside of the card, I cut a piece of Neenah 110lb Classic Crest Cardstock 8.5 X 11″ to 4 x 5-1/4″ and stamped a sentiment from Lawn Fawn’s Pick of the Patch with Dusty Concord Distress Oxide Ink. I added a candy corn image and that completes this card.

Dimensions


Supplies

Thanks for reading this post. I hope you enjoyed and I’ve inspired you to Shop Your Stash and see what fun ideas you come up with and maybe rediscover supplies you forgot you had! Leave comments or questions below or feel free to email me.

Halloween

Halloween Cards Day #4

Happy Friday everyone! Halloween is just about 4 weeks away! Have you picked out your costumes yet?!? What will you be for Halloween???

This card cute Halloween card uses old and knew Halloween supplies from various companies. The adorable black cat and his hat come from an older Stampin’ Up! Designer Series Halloween Paper Collection. I punched him out using a coordinating punch.

To begin this card, I die cut a piece of Simon Says Stamp Black Cardstock with Lawn Fawn’s Large Stitched Rectangles, which measures to 5-1/2 x 4-1/4″. Next, I die cut a circle 1-1/4″ from some Inkadinkado Stamping Mask Paper and added it to the black panel where my moon will be.

Starting from the bottom up, I used Seedless Preserves Distress Oxide Ink, Faded Jeans Distress Oxide Ink, Chipped Sapphire Distress Oxide Ink, and Black Soot Distress Ink. I left the bottom 1/4 of the page blank since it will be hidden so I started with Seedless Preserves Distress Oxide Ink towards the bottom, blended in Faded Jeans Distress Oxide Ink above that color, and then Chipped Sapphire Distress Oxide Ink above Faded Jeans. Then I added some Black Soot Distress Ink towards the top and all the edges to distress it a bit. I let that dry a bit and then used Scattered Straw Distress Ink to ink blend the moon. I started in the center and faded out.

Once all the ink was dry, I prepped the whole thing with an anti-static bag and heat embossed the spider web from the Spider Web Background Stamp by Catherine Pooler Designs using Versamark clear embossing ink and Wow white embossing powder in the top left corner of the panel.

I die cut the fence from the Lawn Fawn Spooky Fence Border from Simon Says Stamp Black Cardstock. And cut a piece of striped Halloween paper from Spooky Night Designer Series Paper by Stampin’ Up!, measuring approximately 1-3/4″ x 6 and then die cut it with Lawn Fawn’s Large Stitched Rectangles. The final piece measures 1-3/4 x 5-1/2″. I adhered the Spooky Fence to the back of that striped piece and adhered both to the sky panel. I then added some Black Soot Distress Ink around the edges of the pattern piece. I added a piece of 1/4″ grosgrain orange ribbon under the fence and adhered the whole panel to a card base measuring 5-1/2 x 8-1/2″and scored at 4 1/4″ from Simon Says Stamp Black Cardstock.

I stamped the HAPPY HALLOWEEN sentiment from the Everything but the Broom by Catherine Pooler Designs Stamp Set in Orange Twist Ink by Catherine Pooler Designs onto a scrap of cut a piece of Neenah 110lb Classic Crest Cardstock 8.5″X11″ and fussy cut it out. I stamped the little spider from the stampset as well with Memento Tuxedo Black Ink and die cut it with the coordinating die.

I punched out one of the black cats from the Spooky Night Designer Series Paper by Stampin’ Up! using the Stampin’ Up!’s Cat Punch and the witch hat from another sheet of the same DSP. I adhered the cat, sentiment and the spider to the card with Stampin’ Dimensionals. I finished it off by adding some Nuvo Crystal Drops in Violet Galaxy and Ranger Stickles in Orange Peel and adding some sparkle with the Spectrum Noir Clear Sparkle Pen.

For the inside of the card, I cut a piece of Neenah 110lb Classic Crest Cardstock 8.5″X11″ to 4 x 5-1/4″ a piece of the striped paper to 3/4 x 4″ and adhered it to the bottom of the white piece. I added some Black Soot Distress Ink around the edges of the piece and adhered it to the inside of the card base. I stamped the spider and 31 from the Everything but the Broom by Catherine Pooler Designs Stamp Set and some of the smaller text from the Spooky Hollow by Catherine Pooler Designs Stamp Set with Memento Tuxedo Black Ink and Orange Twist Ink by Catherine Pooler Designs.

Dimensions

Thanks for reading this post and I hope I’ve inspired you to go make some Halloween cards of your own. Leave comments or questions below or feel free to email me.

Halloween

Halloween Cards Day #3

Happy Friday friends! Coming to you today with a fun and easy Halloween card featuring the Spooky Hollow by Catherine Pooler Designs and Everything but the Broom by Catherine Pooler Designs Stamp Sets. I love, love, love these two stampsets! The whole Halloween collection which was released last year is great fun but these two stampsets are my fave! If you don’t like to color images this is the card for you! Let’s get started…

I began with a card base made from Simon Says Stamp Black Cardstock, measuring 5-1/2 x 8-1/2″and scored at 4 1/4″ and a piece cut to 4 x 5-1/4″. Using the Spider Web Background Stamp by Catherine Pooler Designs and my MISTI, I stamped spider web with Versamark Clear Emboss Ink and heat embossed with Wow Neutral Ultra Shimmer Embossing Glitter. Then with the Stampin’ Up! Layering Circles Dies, I diecut three 1″ circles windows out of the card panel and a 2-1/8″ circle from Neenah 110lb Classic Crest Cardstock 8.5″X11″ for the sentiment.

I added some Foam Tape to the back of the panel and adhered the three words behind each window, then adhered it to the card base. For the three words that go inside the windows I just cut them into squares before adhering them.

Next I did some stamping. I stamped the sentiment from Everything but the Broom by Catherine Pooler Designs Stamp Set in Orange Twist Ink by Catherine Pooler Designs and three tiny words from the Spooky Hollow by Catherine Pooler Designs onto scraps of Simon Says Stamp Black Cardstock, using Versamark Clear Emboss Ink and heat embossed with Wow white embossing powder. I also stamped the little spider from Everything but the Broom by Catherine Pooler Designs Stamp Set 2x onto Neenah 110lb Classic Crest Cardstock 8.5″X11″ and the witch hat onto a piece of purple pattern paper the Queen & Co Halloween Hooplah 6 x 6 mat Stack with Ranger Archival Ink – Jet Black. I colored the band on the witch hat with two purple COPIC markers to give it some interest and diecut all three images with their coordinating dies.

I adhered the sentiment circle and the hat with some Stampin’ Dimensionals to the card as well as the spider. I added some White Cotton Embroidery Floss (which I’ve had in my stash for ages BTW) for the spider’s string. I finished it off with some Nuvo Crystal Drops in Violet Galaxy and Ripened Pumpkin.

For the inside of the card I cut a piece of Neenah 110lb Classic Crest Cardstock 8.5″X11″ to 4 x 5-1/4″and stamped the spiderweb with Spider Web Background Stamp by Catherine Pooler Designs and some Stampin’ Up! Smoky Slate Ink. I stamped a HAPPY HALLOWEEN sentiment from Everything but the Broom by Catherine Pooler Designs with Orange Twist Ink by Catherine Pooler Designs over the spiderweb and adhered the second spider I stamped and added a “string” above it with my Faber-Castell Pitt Artist Pen: Black, 0.7 millimeters.

Dimensions

Thanks for reading this post and I hope I’ve inspired you to go make some Halloween cards of your own. Leave comments or questions below or feel free to email me.

Halloween

Halloween Cards Day #2

Hello friends. Today’s card features some adorable crafty little squirrels from Lawn Fawn’s Pick of the Patch Stampset. This stamp set can be for both Fall and Halloween but it can also be used in combination with other cute Lawn Fawn stamps to create other occasion cards. It also pairs well with the Lawn Fawn Reveal Wheel Die and Pick of the Patch Reveal Wheel Add-ons.

While this card looks very time consuming, it really isn’t. The most time consuming part was the coloring. I started by diecutting the tree using the Lawn Fawn Landscape Leafy Tree Backdrop from some Simon Says Stamp Black Cardstock. Then starting with a piece of Old Olive Cardstock measuring approximately 3 x 4-1/4″, I diecut the grass using the Lawn Fawn Simple Grassy Hillsides Dies. Next I cut out a piece of Neenah 110lb Classic Crest Cardstock 8.5″X11″ to 4-1/4 x 5-1/2″. I used Seedless Preserves, Chipped Sapphire and Faded Jeans Distress Oxide Inks to create a night sky. I started with Seedless Preserves, then blended Chipped Sapphire above that and Faded Jeans above that. Once all was blended, i added some Black Soot Distress Ink at the very top portion, over the blues to darken it up a bit.

While the inks dried, I stamped the all the pumpkins, the squirrels and the carving tools and added faces to the pumpkins from the Lawn Fawn Pick of the Patch stampset using Memento Tuxedo Black Ink. I will be coloring these with Copics later. I set those aside to dry and added some Peeled Paint Distress Ink to the bottom 2/3 of the grassy hillside.

The back panel was dry by this point so I added some stars from the Lawn Fawn Pick of the Patch stampset using Versamark Clear Emboss Ink and Wow White Embossing Powder. I made sure to prep the surface with an Anti-Static Powder before embossing the area. Lastly I added some splashes with white acrylic paint (any white acrylic paint will do).

It was time to color. I like to do this usually while watching some videos on my Ipad. Just relax and color. Sometimes when I don’t feel inspired to create, I will stamp out images from stampsets I may have sitting on my desk waiting to be used and just sit and color them while watching TV.

I used Copic Markers to color everything (all the colors are listed at the end of this post. I diecut those images out with the coordinating dies. I also added some highlights with my Uni-Ball Signo White Gel Pen.

I stamped the sentiment from the Lawn Fawn Pick of the Patch stampset using Orange Twist Ink by Catherine Pooler Designs onto a scrap of cut a piece of Neenah 110lb Classic Crest Cardstock 8.5″X11″. I made sure it was at least 5-1/2″ wide. Then cut it down to 5/8 x 5-1/2″. I find it easier to start with a larger piece of paper than needed because even using my MISTI I can’t seem to center it correctly all the time. LOL. Anyone else have this problem???

Ok, it’s time to assemble this card. I adhered the grassy hillside to the tree backdrop panel first. Trimmed off any excess cardstock and added some Foam Tape behind all of the grass and tree backdrop. I left the top of the grass without Foam Tape so I can tuck some pumpkins behind it. I aligned the sky panel behind the tree backdrop and stuck those together. I laid out my images where I wanted and adhered them onto the panel, tucking two pumpkins behind the grass, one in front of it but all adhered flat. I then adhered the carved pumpkin towards the bottom and popped up the squirrels and carving tools with some Stampin Up! Dimensionals.

At this point I was looking at my card and decided I needed to add some leaves because the grass had too much dead space so I used Eucalyptus Ink by Catherine Pooler Designs and stamped the leaf from the Lawn Fawn Pick of the Patch stampset all over the grass.

I adhered the sentiment strip to the top 1/3 of the card over the tree. I added this completed panel to a card base created from Simon Says Stamp Black Cardstock and measuring 5-1/2 x 8-1/2″and scored at 4-1/4″. Last but not least, I added some Nuvo Glitter Drops in White Blizzard to the sky to add some sparkle and Nuvo Crystal Drops in Bottle Green on each side of the sentiment strip.

I generally don’t like to leave the inside of my cards (especially holiday cards) empty inside so I stamped the HAPPY HALLOWEEN sentiment from the stampset in Memento Tuxedo Black Ink and the pumpkins in Orange Twist Ink by Catherine Pooler Designs and Memento Tuxedo Black Ink onto a piece of Neenah 110lb Classic Crest Cardstock 8.5″X11″, cut to 4 x 5-1/4″.


Dimensions


Copic Colors Used

  • Pumpkins: YR04, YR12 and YR27 ; Stems: YG13 and YG25; Guts: Y13 and YR04
  • Squirrels: W1, W5 and W7; Cheeks: R20
  • Pumpkin scooper: YG13 and G94
  • Knife handle: BV11 and BV17; Knife blade: C00 and C3

Supplies

https://linkdeli.com/widget.js?1559654439292

Thanks for reading this very long post and I hope I’ve inspired you to make some Halloween cards of your own. Leave comments or questions below or feel free to email me.

Halloween

Halloween Cards Day #1

Halloween is just 7 weeks away but who’s counting?!? Umm. Me! I love Halloween even if I don’t get to dressed up anymore. It’s still sooo much fun!!!!

So I’m kicking off my Halloween series with an easy card. Black cardstock, stamps, embossing powder and some colored pencils is all you really need. So grab your favorite Halloween stamps and let’s begin!

I started with a panel of Simon Says Stamp Black Cardstock cut to 5 1/2 x 4 1/4″. When your whole image is going to be heat embossed, it’s a good idea to start with a piece of paper/cardstock that is slightly larger than you will need. This gives room for errors. God knows I need it! LOL.

I pulled out one my new favorite Halloween stampsets, the Spooky Hollow by Catherine Pooler Designs then using my MISTI, I laid out the stamps I needed and mapped out my scene.

I prepped the surface with an anti-static bag (especially important on dark cardstocks) and stamped the house, the tree, one bat and the moon first, using Versamark clear embossing ink and Wow white embossing powder. Next, I reapplied some more anti-static powder and stamped and heat embossed the second bat and the fence which I had to stamp 3-4 times to get a continuous fence. Then stamped and white heat embossed the sentiment onto a scrap of Simon Says Stamp Black Cardstock. Before I diecut this panel out, I added some white dots with my Uni-Ball Signo Broad Point White Gel Pen to the sky. This can also be done with paint splatters. I just wasn’t in the mood for the mess that day.

Once all the stamping was done, I diecut the panel using the largest die from Lawn Fawn’s Small Stitched Rectangle Dies which measures 3-3/4 x 5″.

Time to color the house… You can certainty leave it uncolored but I wanted it to stand out and I was curious to see how my Prismacolor Pencils looked on the black cardstock.

I used two greens for the roof and door, two purples for the house, two greys for the porch floor, a yellow for the window shutters and a yellow orange for the inside of the window, and finally two reddish browns for the wood boards. Prismacolor Pencils have a rich pigment so they show up on dark cardstock nicely. Then I fussycut the sentiment and adhered it using Stampin’ Dimensionals.

I diecut a panel of some very old Halloween pattern paper from my stash using the largest die from Lawn Fawn’s Large Stitched Rectangles which measures to 5-1/2 x 4-1/4″. I distressed it a bit using Ranger Black Soot Distress Ink. Then adhered the black panel onto it and that to a card base (Simon Says Stamp Blue Violet 100lb Cardstock) measuring 5-1/2 x 8-1/2″and scored at 4 1/4″.

Lastly I finished off the card with some Nuvo Glitter Drops in White Blizzard. But I couldn’t leave the inside empty so cut a panel of Neenah 110lb Classic Crest Cardstock 8.5″X11″ to 8 1/2 x 5 1/2″ and adhered a piece of the same Halloween pattern paper, measuring 3/4 x 5-1/4″ to the bottom edge, which I also distressed with Black Soot Distress Ink.

But I didn’t stop there. I was having too much fun with this card so I used the fence stamps from Spooky Hollow by Catherine Pooler Designs and white heat embossed it along the bottom edge of a black Euroflap Envelope.

Dimensions

Supplies

Thanks for stopping by and I hope I’ve inspired you to start making your Halloween cards. Leave comments or questions below or feel free to email me.