Cards, Christmas, Holidays 2020, Stampin' Up!

Creating Two Different Backgrounds Using Stampin’ Up!’s Tree Angle Stampset

These two card backgrounds were created using the stamps in the Tree Angle Stampset by Stampin’ Up which can be found on page 22 of the new Aug-Dec Mini Catalog. You can make lots of quick backgrounds with these stamps. This stampset coordinates with the Stitched Triangles Dies (pg 179 of the Annual Catalog).

For the first card, I started by cutting a piece of Whisper White 8-1/2″ X 11″ Thick Cardstock to 5-1/2 x 8-1/2″ and scored at 4-1/4″ to make a card base. Then cut a piece of Whisper White 8-1/2″ X 11″ Cardstock to 3-3/4 x 5″ for the top panel.

I stamped the poinsettia and leaf tree patterns all over the background from the Tree Angle Stampset onto Whisper White 8-1/2″ X 11″ Cardstock with Stampin’ Up! Real Red and Old Olive Inks and adhered the panel to the card base.

I die cut a 3″ scalloped square from Stampin’ Up!’s 8-1/2″ X 11″ Vellum Cardstock using the Stampin’ Up! Layering Squares Dies and the “Merry Christmas” sentiment from Red Foil using the Word Wishes Dies and adhered them to the card with Tombow Mono Multi Glue. I also cut two strips of the Red Foil, measuring 1/4 x 5″ and 1/16 x 5″ and adhered them to the card panel. I finished it off by adding three adhesive Pearls (retired) on each side.

On the inside, I stamped a sentiment from the Tree Angle Stampset with Stampin’ Up! Real Red Ink.

Dimensions


For the second card, I started by cutting a piece of Whisper White 8-1/2″ X 11″ Thick Cardstock to 5-1/2 x 8-1/2″ and scored at 4-1/4″ to make a card base. Then cut a piece of Stampin’ Up!’s Garden Green 8-1/2″ X 11″ Cardstock to 4 x 5-1/4″ for the top panel.

I stamped all the tree patterns except the poinsettias from the Tree Angle Stampset onto all over the Garden Green panel with Stampin’ Up! Garden Green Ink, creating a geometric pattern and adhered the panel to the card base.

I stamped three of the trees from the Tree Angle Stampset ontoa piece of Whisper White 8-1/2″ X 11″ Cardstock with Stampin’ Up! Poppy Parade and Blushing Bride for the trees, and Soft Suede Ink for the tree stumps. I used Versamark Ink and Gold Emboss Powder to stamp and heat emboss the star as well as the sentiment from stampset. I used some Stampin’ Dimensionals to adhere the red tree and star.

On the inside, I stamped another sentiment from the Tree Angle Stampset with Stampin’ Up! Poppy Parade Ink and some of the trees with Blushing Bride and Garden Green Inks. And that completes this card.

Dimensions


Supplies

Thanks for reading this post. I hope you enjoyed and I’ve inspired you to try these easy holiday cards using this stampset for yourself! Leave comments or questions below or feel free to email me. If you want to share you creations with me tag me on instagram @kittieslovecrafting. If you would like a Stampin’ Up! catalog, please email me as well. All current catalogs can be found on the right side of this post and the Stampin’ Up! page. All news and fun stuff happening at Stampin’ Up! are listed there!

Cards, Christmas, Fall, Holidays 2020, Stampin' Up!, Winter

Life Is Beautiful by Stampin’ Up! (from the new Aug-Dec Mini Catalog)

The Life Is Beautiful stampset by Stampin’ Up! at first glance looks like a very simple stampset but once you stamp the images you will notice the details in the images which give them dimension. It reminds me of another Stampin’ Up! (retired) stampset, Sheltering Tree, which I have loved for many years. Anyone else remember that stampset? I love this one sooo much more though–and I think it’s because of all the details. This lovely stampset can be found in the new Aug-Dec Mini Catalog which has a ton of awesome goodies for the holidays. I will definitely be making more cards with this stampset!

I started the first card by cutting a piece of Whisper White 8-1/2″ X 11″ Thick Cardstock to 5-1/2 x 8-1/2″ and scored at 4-1/4″ to make a card base. Then cut a piece of Plaid Tidings 6 x 6 Designer Series Paper to 4-1/4 x 5-1/2″ for the top panel, a piece of Early Espresso 8-1/2 x 11″ Cardstock to 3-7/8 x 5 1/16″, and a piece of Whisper White 8-1/2″ X 11″ Cardstock to 3-3/4 x 4-7/8″. I adhered the plaid paper to the card base and the Early Espresso 8-1/2 x 11″ Cardstock panel to the plaid paper.

I stamped the tree trunk from the Life Is Beautiful stampset to the white panel with Crumb Cake Ink, I layered the leaves by stamping them several times with Bumblebee, Pumpkin Pie and Cherry Cobbler inks, and used Early Espresso and Real Red Stampin’ Write Markers to stamp the little bird house.

For the background I used a American Crafts Heidi Swapp Stencil 6 X6 Polka Dot with Pool Party Ink then inked around the background to give it some more color. I adhered that to the Early Espresso 8-1/2 x 11″ Cardstock and then stamped a sentiment from the same stampset onto Whisper White 8-1/2″ X 11″ Cardstock with Early Espresso Ink. I cut it down to 1 x 3-3/4″, added Stampin’ Dimensionals behind it and added it to the card. I finished it off by adding a piece of 3/8″ chocolate brown satin ribbon.

I left the inside of the card blank and just added cut a piece of Plaid Tidings 6 x 6 Designer Series Paper, measuring 1 x 4-1/4″.

Dimensions


I went with a winter/Christmas theme for the second card; I just really wanted to heat emboss the snowflakes from the Life Is Beautiful stampset. This card features the Tree Angle stampset as well.

I started the second card by cutting a piece of Cherry Cobbler 8-1/2″ X 11″ Cardstock to 5-1/2 x 8-1/2″ and scored at 4-1/4″ to make a card base. Then cut a piece of Plaid Tidings 6 x 6 Designer Series Paper to 4-1/4 x 5-1/2″ for the top panel, a piece of Whisper White 8-1/2″ X 11″ Cardstock to 3-7/8 x 5 1/16″, and another piece of Whisper White 8-1/2″ X 11″ Cardstock to 3-3/4 x 4-7/8″. I adhered the plaid paper to the card base and the Whisper White 8-1/2″ X 11″ Cardstock panel to the plaid paper.

I stamped the tree trunk from the Life Is Beautiful stampset to the white panel with Basic Gray Ink, then stamped the whole image with Versamark Ink and heat embossed with Clear Stampin’ Emboss Powder. I stamped the ornaments from the Tree Angle stampset with Cherry Cobbler and Shaded Spruce inks, and Smoky Slate Stampin’ Write Markers to stamp the string on the ornaments. I used an Sponge Dauber to apply the ink to each of the ornaments since there were two coors involved. I then stamped the whole image with Versamark Ink and heat embossed with Clear Stampin’ Emboss Powder. Tip: Use a stamping platform such as the Stamparatus to do this so it’s in the same spot.

I used the snowflakes stamp from the Life Is Beautiful stampset with Versamark Ink and stamped it several times over the tree, then added White Stampin’ Emboss Powder. I did some ink blending in the background with Balmy Blue Ink, and adhered the panel to the card.

I stamped a sentiment from the Tree Angle stampset onto Whisper White 8-1/2″ X 11″ Cardstock with Cherry Cobbler Ink and cut it down to 3/4 x 4” and adhered with Stampin’ Dimensionals. To finish it off I added tiny Stampin’ Up! Pearls (retired) to the snowflakes and colored two large ones with Real Red Stampin’ Blends.

On the inside of the card, I added a piece of Plaid Tidings 6 x 6 Designer Series Paper, measuring 1 x 4-1/4″ and stamped the sentiment and ornaments from the Tree Angle stampset with Shaded Spruce Ink.

Dimensions


Supplies

Thanks for reading this post. I hope you enjoyed and I’ve inspired you to try these cards using this beautiful stampset for yourself! Leave comments or questions below or feel free to email me. If you want to share you creations with me tag me on instagram @kittieslovecrafting. If you would like a Stampin’ Up! catalog, please email me as well. All current catalogs can be found on the right side of this post and the Stampin’ Up! page. All news and fun stuff happening at Stampin’ Up! are listed there!