Halloween

Halloween Cards Day #2

Hello friends. Today’s card features some adorable crafty little squirrels from Lawn Fawn’s Pick of the Patch Stampset. This stamp set can be for both Fall and Halloween but it can also be used in combination with other cute Lawn Fawn stamps to create other occasion cards. It also pairs well with the Lawn Fawn Reveal Wheel Die and Pick of the Patch Reveal Wheel Add-ons.

While this card looks very time consuming, it really isn’t. The most time consuming part was the coloring. I started by diecutting the tree using the Lawn Fawn Landscape Leafy Tree Backdrop from some Simon Says Stamp Black Cardstock. Then starting with a piece of Old Olive Cardstock measuring approximately 3 x 4-1/4″, I diecut the grass using the Lawn Fawn Simple Grassy Hillsides Dies. Next I cut out a piece of Neenah 110lb Classic Crest Cardstock 8.5″X11″ to 4-1/4 x 5-1/2″. I used Seedless Preserves, Chipped Sapphire and Faded Jeans Distress Oxide Inks to create a night sky. I started with Seedless Preserves, then blended Chipped Sapphire above that and Faded Jeans above that. Once all was blended, i added some Black Soot Distress Ink at the very top portion, over the blues to darken it up a bit.

While the inks dried, I stamped the all the pumpkins, the squirrels and the carving tools and added faces to the pumpkins from the Lawn Fawn Pick of the Patch stampset using Memento Tuxedo Black Ink. I will be coloring these with Copics later. I set those aside to dry and added some Peeled Paint Distress Ink to the bottom 2/3 of the grassy hillside.

The back panel was dry by this point so I added some stars from the Lawn Fawn Pick of the Patch stampset using Versamark Clear Emboss Ink and Wow White Embossing Powder. I made sure to prep the surface with an Anti-Static Powder before embossing the area. Lastly I added some splashes with white acrylic paint (any white acrylic paint will do).

It was time to color. I like to do this usually while watching some videos on my Ipad. Just relax and color. Sometimes when I don’t feel inspired to create, I will stamp out images from stampsets I may have sitting on my desk waiting to be used and just sit and color them while watching TV.

I used Copic Markers to color everything (all the colors are listed at the end of this post. I diecut those images out with the coordinating dies. I also added some highlights with my Uni-Ball Signo White Gel Pen.

I stamped the sentiment from the Lawn Fawn Pick of the Patch stampset using Orange Twist Ink by Catherine Pooler Designs onto a scrap of cut a piece of Neenah 110lb Classic Crest Cardstock 8.5″X11″. I made sure it was at least 5-1/2″ wide. Then cut it down to 5/8 x 5-1/2″. I find it easier to start with a larger piece of paper than needed because even using my MISTI I can’t seem to center it correctly all the time. LOL. Anyone else have this problem???

Ok, it’s time to assemble this card. I adhered the grassy hillside to the tree backdrop panel first. Trimmed off any excess cardstock and added some Foam Tape behind all of the grass and tree backdrop. I left the top of the grass without Foam Tape so I can tuck some pumpkins behind it. I aligned the sky panel behind the tree backdrop and stuck those together. I laid out my images where I wanted and adhered them onto the panel, tucking two pumpkins behind the grass, one in front of it but all adhered flat. I then adhered the carved pumpkin towards the bottom and popped up the squirrels and carving tools with some Stampin Up! Dimensionals.

At this point I was looking at my card and decided I needed to add some leaves because the grass had too much dead space so I used Eucalyptus Ink by Catherine Pooler Designs and stamped the leaf from the Lawn Fawn Pick of the Patch stampset all over the grass.

I adhered the sentiment strip to the top 1/3 of the card over the tree. I added this completed panel to a card base created from Simon Says Stamp Black Cardstock and measuring 5-1/2 x 8-1/2″and scored at 4-1/4″. Last but not least, I added some Nuvo Glitter Drops in White Blizzard to the sky to add some sparkle and Nuvo Crystal Drops in Bottle Green on each side of the sentiment strip.

I generally don’t like to leave the inside of my cards (especially holiday cards) empty inside so I stamped the HAPPY HALLOWEEN sentiment from the stampset in Memento Tuxedo Black Ink and the pumpkins in Orange Twist Ink by Catherine Pooler Designs and Memento Tuxedo Black Ink onto a piece of Neenah 110lb Classic Crest Cardstock 8.5″X11″, cut to 4 x 5-1/4″.


Dimensions


Copic Colors Used

  • Pumpkins: YR04, YR12 and YR27 ; Stems: YG13 and YG25; Guts: Y13 and YR04
  • Squirrels: W1, W5 and W7; Cheeks: R20
  • Pumpkin scooper: YG13 and G94
  • Knife handle: BV11 and BV17; Knife blade: C00 and C3

Supplies

https://linkdeli.com/widget.js?1559654439292

Thanks for reading this very long post and I hope I’ve inspired you to make some Halloween cards of your own. Leave comments or questions below or feel free to email me.

Halloween, Uncategorized

Halloween Cards Day #1

Halloween is just 7 weeks away but who’s counting?!? Umm. Me! I love Halloween even if I don’t get to dressed up anymore. It’s still sooo much fun!!!!

So I’m kicking off my Halloween series with an easy card. Black cardstock, stamps, embossing powder and some colored pencils is all you really need. So grab your favorite Halloween stamps and let’s begin!

I started with a panel of Simon Says Stamp Black Cardstock cut to 5 1/2 x 4 1/4″. When your whole image is going to be heat embossed, it’s a good idea to start with a piece of paper/cardstock that is slightly larger than you will need. This gives room for errors. God knows I need it! LOL.

I pulled out one my new favorite Halloween stampsets, the Spooky Hollow by Catherine Pooler Designs then using my MISTI, I laid out the stamps I needed and mapped out my scene.

I prepped the surface with an anti-static bag (especially important on dark cardstocks) and stamped the house, the tree, one bat and the moon first, using Versamark clear embossing ink and Wow white embossing powder. Next, I reapplied some more anti-static powder and stamped and heat embossed the second bat and the fence which I had to stamp 3-4 times to get a continuous fence. Then stamped and white heat embossed the sentiment onto a scrap of Simon Says Stamp Black Cardstock. Before I diecut this panel out, I added some white dots with my Uni-Ball Signo Broad Point White Gel Pen to the sky. This can also be done with paint splatters. I just wasn’t in the mood for the mess that day.

Once all the stamping was done, I diecut the panel using the largest die from Lawn Fawn’s Small Stitched Rectangle Dies which measures 3-3/4 x 5″.

Time to color the house… You can certainty leave it uncolored but I wanted it to stand out and I was curious to see how my Prismacolor Pencils looked on the black cardstock.

I used two greens for the roof and door, two purples for the house, two greys for the porch floor, a yellow for the window shutters and a yellow orange for the inside of the window, and finally two reddish browns for the wood boards. Prismacolor Pencils have a rich pigment so they show up on dark cardstock nicely. Then I fussycut the sentiment and adhered it using Stampin’ Dimensionals.

I diecut a panel of some very old Halloween pattern paper from my stash using the largest die from Lawn Fawn’s Large Stitched Rectangles which measures to 5-1/2 x 4-1/4″. I distressed it a bit using Ranger Black Soot Distress Ink. Then adhered the black panel onto it and that to a card base (Simon Says Stamp Blue Violet 100lb Cardstock) measuring 5-1/2 x 8-1/2″and scored at 4 1/4″.

Lastly I finished off the card with some Nuvo Glitter Drops in White Blizzard. But I couldn’t leave the inside empty so cut a panel of Neenah 110lb Classic Crest Cardstock 8.5″X11″ to 8 1/2 x 5 1/2″ and adhered a piece of the same Halloween pattern paper, measuring 3/4 x 5-1/4″ to the bottom edge, which I also distressed with Black Soot Distress Ink.

But I didn’t stop there. I was having too much fun with this card so I used the fence stamps from Spooky Hollow by Catherine Pooler Designs and white heat embossed it along the bottom edge of a black Euroflap Envelope.

Dimensions

Supplies

Thanks for stopping by and I hope I’ve inspired you to start making your Halloween cards. Leave comments or questions below or feel free to email me.

Cards, Christmas, Christmas, Uncategorized

Christmas in July

Hello friends. Another Monday is upon us and July is almost over. I don’t know when the whole Christmas in July phenomenon started but I look forward to it every year now. The Hallmark Channel shows Christmas movies all month long, which I just love; those cheesy Christmas movies are the best! There are crafty sales and giveaways and crafters share cute Holiday cards and crafts. What could be better? It’s also a great time to get a jump start on your holiday cards. Before we know it will be December and time to send out cards!

And since I love a good Christmas card just as much as the next gal, I had to join in the fun before July was over. I kept things simple with this card. First I cut a piece of Neenah 110lb Classic Crest Cardstock 8.5″X11″ to 8 1/2 x 5 1/2″ and scored it at 4 1/4″ for my card base. Next I cut a piece of Simon Says Stamp Card Stock 100lb Lipstick Red to 4 x 5 1/4″, grabbed my Stampers Anonymous – Tim Holtz – Holiday Script Stencil and some Therm O Web TRANSFER GEL iCraft Deco Foil and began the foiling process. It’s super easy but requires patience and drying time.

I taped the red cardstock to my work surface using some Post-it Tape and then taped in place the stencil where I wanted it. Since this stencil is narrower than the cardstock panel, if you want to cover the whole background you will have to do these steps twice. I did not have to do this however since I will be covering the left side. I used a palette knife to spread the deco foil transfer gel over the stencil, making sure to spread it evenly and thinly. You don’t want a thick uneven layer or the foil will not stick correctly. I set that aside to dry (it took a couple of hours) and took cut a piece of Stampin’ Up! Old Olive Cardstock to 1 1/8 x 5 1/4″ and ran it through my diecut machine using the Darice Diagonal Stripe Embossing Folder.

Still waiting for the first half of the deco foil gel to dry, I proceeded to diecut my snowflakes. I cut 3 snowflakes using the Delicate Snowflake Die by Catherine Pooler Designs from Neenah 110lb Classic Crest Cardstock 8.5″X11″ and adhered them together to create a dimensional snowflake.

Several hours later…

The transfer gel will look shiny once it is dried. I placed a piece of the Therm O Web Gina K Designs RADIANT RED Fancy Foils Deco Foil over the red panel, sandwiched it inside a folded piece of parchment paper and ran it through my laminator (make sure it is good and hot). It comes out so pretty! I took the embossed piece of Stampin’ Up! Old Olive Cardstock and adhered it to the left side of the red foiled panel, added a strip of the wider Pin Stripe Peel-Off Stickers – Gold Mirror Moondust from Love From Lizi and then adhered that all to my card base, leaving a 1/8″ border all around the card.

Time to add the snowflake. I adhered that 3D white snowflake roughly in the center of the card, added some Tonic PALE GOLD Nuvo Crystal Drops to the center of the snowflake, the top and bottom of the card panel. And the card is finished! Oh wait! we need a sentiment!

I added the “Merry & Bright” sentiment from Peaceful Flakes Stamp Set by Catherine Pooler Designs to the inside of the card using my Old Olive Classic Stampin’ Pad by Stampin’ Up! as well as a large snowflake from Peaceful Flakes Stamp Set by Catherine Pooler Designs in Real Red Classic Stampin’ Pad | Stampin’ Up! to the bottom right corner. Ok now this card I complete!!!!

Supplies

Thanks for stopping by and I hope I’ve inspired you to start making your Christmas/Holiday cards. Leave comments or questions below or feel free to email me.

Cards, Celebrations, Encouragement, Just Because, Mother’s Day

Stampin’ Up! So Hoppy Together Stampset

Hello friends, I’m coming at you today with this cute and simple froggy card using Stampin’ Up!’s SO HOPPY TOGETHER Stamp Set. I’ve had this stampset for awhile and just got around to making some cards. It was part of the Stampin’ Up! Sale-a-bration 2019 catalog so unfortunately is no longer available but I still wanted to present some inspiration for those of you who have this stampset. And if you don’t have the stampset you can easily substitute another critter for the frogs. And if you want to own any of these cards they are both available for sale in my Etsy shop.

Celebrate Your Awesomeness Card

For this card I kept things simple. I cut a card base to 8 1/2 x 5 1/2” from Neenah Solar White 110lb Cardstock and scored it at 4 1/4”. Then cut and adhered a panel measuring 4 1/4 x 5 1/2” and a Strip to 1 3/4 x 5 1/2” from Queen and Company Flirty Florals Paper Pad to the card base. Using a paper pad is a great way to ensure that all your pattern papers coordinate. No guessing necessary.

I stamped the frog images onto Neenah Solar White 110lb Cardstock using Tuxedo Black Memento Ink and colored them with Daffodil Delight Stampin’ Blends Markers, Granny Apple Green Stampin’ Blends Markers, Highland Heather Stampin’ Blends Markers, Pool Party Stampin’ Blends Markers and Rich Razzleberry Stampin’ Blends Markers.

I fussycut all the images out then diecut the circles with the Queen and Company Foundation Dies #1. Using the Company Sentiment Stacker Dies, I diecut the ‘Celebrate’ word from Simon Says Stamp Black Card stock and the shadow from Stampin’ Up! Vellum. I adhered those two pieces together then proceeded to stamp and heat emboss the sentiment strip onto black cardstock using Versamark clear embossing ink and Wow white embossing powder. That was then cut out using the Company Foundation Dies #2.

I figured out the placement of all the images and sentiments on the card and adhered. Finished it off with some Nuvo drops in Key Lime, Purple Rain and Sea Breeze. I also stamped the froggy image on a white envelope.

Dimensions

Supplies

Hoppy For You

This card is my favorite of the two. Also quite easy to make. This time the pattern paper is just an accent or enhancement.

I cut a card base to 8 1/2 x 5 1/2” and a panel to 4 x 5 1/4” from Neenah Solar White 110lb Cardstock. Then cut a strip of Catherine Pooler Black Tie Gala Patterned Paper to 1 3/16 x 5 1/4” and Simon Says Stamp Black Card stock to 1 3/8 x 5 1/4″. I adhered those two pieces together and then to the card panel. Then adhered the white card panel to the card base.

I had already stamped and colored the images prior to starting this card. If I know I’m making multiple cards using the same stamp set, I like to stamp and color all the images I need (or just a bunch of I’m not sure what I want to use) before I create my cards. I will fussycut them just before I begin the cardmaking process. Onto the next step then…

I used some Neenah Solar White 110lb Cardstock and used the direct-to-paper method to color with Catherine Pooler Fiesta Blue Ink. This method is a great way to match your cardstock to your project. If you want to see this technique in action check out this video from Catherine Pooler.

Next I diecut the word “HOPPY” with the Honey Bee Bee Bold Alphabet Dies. I also cut two additional sets of the word from Neenah Solar White 110lb Cardstock. I stacked the two white sets together and adhered, followed by the colored set of letters on top of those.

I stamped the sentiment with the Lawn Fawn Happy Happy Happy Sentiments using Versamark clear embossing ink onto Simon Says Stamp Black Card stock and heat embossed with Wow white embossing powder. I cut it down to a strip measuring 1/2 x 1 3/4”. Time to adhere the sentiments and the little froggy on his unicycle as well as his fluttering friends. He’s just so cute, don’t you think?!? Finished it off with some Nuvo drops in Key Lime, Sea Breeze, and Rosewater. Lastly I stamped a little frog on a white envelope in Catherine Pooler Fiesta Blue Ink.

Dimensions

Supplies

Thanks for stopping by and I hope I’ve inspired you to make some adorable critter cards of your own. Leave comments or questions below or feel free to email me.

Cards, Mother’s Day

Easy Mother’s Day Card

Hello friends. Coming to you today with a quick and easy Mother’s Day card. If you haven’t found the perfect card for mom yet, you will want to give this one a try. Only one type of paper is required. And the addition of a stencil, ink and a die makes it super easy to create a card with texture. It can also be for any other occasion–just change out the sentiment.

Supplies

I started by cutting down a piece of Neenah Solar White 110lb Cardstock to 4 x 5-1/4″. Then created a pattern in the background using Catherine Pooler Designs Rose Petals and Catherine Pooler Designs Pattern of Rings Creative Screening.

I set that aside to dry and stamped the teapot in Catherine Pooler Designs Polished and Catherine Pooler Designs Green Tea with Catherine Pooler Designs Cuppa Tea Stamp Set. I stamped the teacup and plate in Catherine Pooler Designs Green Tea and Catherine Pooler Designs Icing-on-the-Cake and the little embellishment in Catherine Pooler Designs Polished. Lastly I stamped the flower for the teapot in both Catherine Pooler Designs Green Tea and Catherine Pooler Designs Rose Petals. I diecut all the images with the coordinating dies, Cuppa Tea Dies.


Catherine Pooler Designs Cuppa Tea Stamp Set

I added a sentiment from the Lawn Fawn HAPPY HAPPY HAPPY Clear Stamps. I stamped the HAPPY in Catherine Pooler Designs Green Tea onto the card panel at the top left and the MOTHER’S DAY in Catherine Pooler Designs Polished on a scrap of Neenah Solar White 110lb Cardstock. I diecut that sentiment using the banner from Queen and Company Foundation Dies #2.

I glued that banner down to a piece of Neenah Solar White 110lb Cardstock after using the direct-to-paper method to color it with Catherine Pooler Designs Polished. I added 3M foam tape to the back of the teacup, plate and teapot and adhered it to the card.

Mother’s Day Card

I cut down a piece of Neenah Solar White 110lb Cardstock to 5 1/2 x 8 1/2″, scored at 4 1/4″ to create a card base. I then cut a piece Neenah Solar White 110lb Cardstock to 4 1/4 x 5 1/2″ and again used the direct-to-paper method to color it with Catherine Pooler Designs Green Tea. I adhered that Green Tea panel to the card base and the completed card panel with images onto that piece.

I finished off the card by adding some Tonic Nuvo drops in Carnation Pink and Tonic Nuvo Jewel Drops in Rosewater.

Supplies

Thanks for stopping by. Hope you enjoyed this process post. Leave comments or questions below or feel free to email me.

DIY Projects, Easter

Quick and Easy Easter Wreath

Easter is around the corner and I finally got around to making my Easter Wreath. Yay! I made this wreath using mostly Dollar Tree supplies. My store didn’t have much so I ordered from their online store and had it shipped to my house. They offer a ship-to-store option too.

A word of caution…if you order flowers online they can arrive crushed as mine did. I ordered 6 stems and only got 5 usable flower heads out of it and those were not that great as you will see in the photos. Keep that in mind.

Anyways,  it was super easy and quick to make. I started off with a 10-inch straw wreath form. I got mine from Hobby Lobby, but they are readily available at other craft stores and online. Check Amazon, Michaels, Joann Fabrics, Walmart and Dollar Tree. My local store did not carry it but I’m guessing others might. I carefully removed the clear plastic wrap around it as it tends to shed. Nor,ally I would normally leave the plastic wrap on it but since I wanted this to look natural and .organic, I removed it.

After cleaning the straw debris from my desk, i wrapped some 5/8 inch wide lavender satin ribbon around the wreath, creating a stripe pattern. I get most of my ribbon from the Ribbon Retreat. This color is called purple haze. A tiny dab of hot glue on each of the ribbon ends secure it to the wreath.

I added the moss next. I used Green Spanish Moss I hot glued it onto the bottom half of the wreath. Once I had enough of the area covered, I wrapped Green Floral Wire, 22 Gauge around the moss to secure it further. Ok the hard part is done. Time to decorate.

I added 5 Green Gerbera Daisies. 6 Speckled Easter Eggs, and 3 3 inch Salisbury Butterflies.To finish it off , i added 3 Pearl Corsage Pins to each ribbon stripe. That’s it. Add a ribbon to hang it and your wreath is complete. Easy peasy. Quickest wreath I’ve ever made.IMG_0526_watermarked

Supplies:

Thanks for stopping by and I hope I’ve inspired you to make your own wreath. Leave comments or questions below or feel free to email me.

Cards, Easter, Watercolor techniques

Easy Watercolor Backgrounds Using Distress Inks

Today’s topic is watercolor backgrounds. Whenever I want a quick and easy background for a card, I go with a watercolor background. You don’t need to know how to watercolor like a pro, you just need some good watercolor paper. The paper makes the difference in the results you get. I used Canson XL Series Watercolor Paper Pad (140 Pound, 9 x 12 Inch). The great thing is, that this technique can be achieved with dye inks, stains, sprays, or watercolors (high end or inexpensive). I used Distress Ink Stains for my backgrounds. I originally pulled out my Distress Ink Pads but then decided that my Distress Ink Stains haven’t been getting enough love so I decided to use those instead. These can be dabbed on or sprayed. These now are sold in spray bottles but if you’re like me and have the original bottles, Ranger sells a spray bottle lid. I used mine straight out of the bottle like watercolor though.

Watercolor Background Supplies

Ok, so let’s get started. First, I taped down my watercolor paper piece (4 1/4 x 5 1/2″) with some ScotchBlue Painters Tape to a hard surface. Protect your surface before you begin because this will be messy. With a clean brush, add some water to your surface, covering the whole area. Then dispense some of ink onto a clear block, craft mat, etc. (I used my glass mat) and then dab/pounce it your paper. If the surface is too dry, add some more water. You can add more ink to certain areas to get darker areas. Alternatively, you can add more water and blot certain areas to subtract color. Stick to one color if you are not comfortable mixing multiple colors together. Keep playing with adding color until you are satisfied.

Let your piece dry in between layers. This will yield a better result, in the end. You can let it air dry or use a heat tool (if you are not patient like me. :)) Once the piece was almost dry I added some splashes using the same ink color for each. I usually do this inside a box since I don’t want my desk and surrounding areas to stained. Let it dry completely before moving onto the next step. And if you want to stop here, you totally can; they look great as is. I wanted to enhance mine by adding another level of texture.

Watercolor Panels

I added texture to only two of the panels by embossing them. On the first panel (blue one), I stamped the Easter eggs from the Newton’s Nook Designs Newton’s Easter Basket Stamp (no longer available) with Versamark clear embossing ink and added Wow white embossing powder. On the third panel (yellow one), I used a the Tim Holtz MINI STENCIL SET 27 MST027 with Ranger Texture Paste Transparent Gloss to add texture. I used only portions of the stencil around the page. Then before it dried, I sprinkled on some Dazzling Diamonds Stampin’ Glitter. Any white glitter will do however. These are now ready to become cards!

Watercolor Panels With Embossing

I made Easter cards with these backgrounds. I used Newton’s Nook Designs Newton’s Easter Basket Stamp on all 3 cards for the images.

I used Simon Says Stamp Some Bunny for the sentiment on the first card and the Lawn Fawn Straight Flower Border Die Cut to build the scene. And finished it with Nuvo drops in different colors. The second card features the Pretty Pink Posh Happy Easter Script Die cut out of 4 layers of cardstock (3 black and one white), stacked up to create the sentiment. The third card showcases the Easter egg kitty by putting him in ovals diecut using Stampin’ Up! Layering Ovals Framelits Dies. I added a sentiment from Newton’s Nook Designs Newton’s Easter Basket Stamp. I created card bases from Stampin’ Up! Tempting Turquoise (retired), Stampin’ Up! Elegant Eggplant (retired), and Stampin’ Up! Crushed Curry 8-1/2″ X 11″ Cardstock, respectively. And finally, on the inside I added a piece of white 80lb cardstock so I can later write a message inside my cards.

Supplies

Thanks for stopping by. I hope this was helpful and I’ve inspired you to create some fun watercolor backgrounds of your own. Feel free to email me with questions or leave a comments below.

Cards, Easter, Holidays, Mother’s Day, Spring, Thank Yous

Spring Cards 2

3 Cards using SSS Blooming Circle and Blooming Wave Wafer Dies

Hi friends. Continuing on with some Spring inspired cards, I pulled out the Simon Says Stamp Blooming Circle Wafer Dies and Simon Says Stamp Blooming Wave Wafer Die to create 3 different cards. It was a little time-consuming to inlay all the flowers and leaves but the results are well worth it

This Easter card combines the Simon Says Stamp Some Bunny stamps and Newton’s Nook Designs Newton’s Easter Basket stamps with the Simon Says Stamp Blooming Circle Wafer Dies. I added patterned paper from both the Doodlebug 6 x 6 Double-sided Paper Pad-Easter Express (discontinued), and Queen & Co Flirty Florals 6 x 6 Mat Stack. Images were colored with Copic markers and fussycut. I inlaid the flowers after diecutting several pieces of scrap rainbow color cardstock. Finished it off by adding some Nuvo Crystal Drops in White Gloss.

Card 2 turned into a Mother’s Day Card. When I started working on these cards I had no idea what the theme would be so I didn’t pick sentiments. But after adding the daisy pattern paper (from Doodlebug 6 x 6 Double-sided Paper Pad-Easter Express (discontinued)), I decided to make into a Mother’s Day card. I used the Simon Says Stamp Blooming Wave Wafer, to create a border then inlaid the flowers after diecutting several pieces of scrap yellow and green cardstock. I used Lawn Fawn Happy Happy Happy Sentiments and the Lawn Cuts Happy Happy Happy to creqte this dimensional sentiment. Finished it off by adding Nuvo Crystal Drops in Ivory Seashell.

And for this 3rd card, I wanted to make it look like rings so I diecut the Simon Says Stamp Blooming Circle Wafer Dies and diecut 3 flower circles, centering one of them. Once again I ran the die through with several color cardstock in rainbow colors. I added a sentiment to the center wreath using Catherine Pooler Designs Good Stuff Inside.Finished it off by adding Nuvo Crystal Drops in White Blizzard Glitter Drops.

Supplies:

Hope you’ve enjoyed this process post and I hope I’ve inspired you to create some cards of your own. Thanks for stopping by and once again please leave questions in the comments or feel free to email me if you prefer.

Cards, Easter, Spring

Spring Cards

Celebrate Spring

Happy Friday!!! It’s time to celebrate the arrival of Spring with this cute card featuring bunnies hopping through the tulips. Can also be used as an Easter card. This card is available for purchase in my Etsy shop.

Ok it may be winter still but I wanted to show how you all that you can use stamps meant for a specific event or holiday and use it for other type of cards. This allows us to stretch our stamps and dies.

Celebrate Spring

I used an older Lawn Fawn stampset, Hello Baby, which is meant for baby cards and used it for a Spring scene instead. Lawn Fawn stamps are great because you can combine different stampsets and they look like they belong together.

WThis card base is a made from Stampin’ Up! Early Espresso cardstock. The sky was made with Lawn Fawn Perfectly Plaid Rainbow 6 x 6 patterned paper and the tree, grass and flowers were diecut from colored card stocks. I used Lawn Fawn’s Leafy Tree Backdrop for the tree and leaves background, Lawn Fawn’s Grassy Hillside Borders for the grass, and the dies from Hello Baby, for the tiny flowers and clouds. The bunnies and tulips on this card were colored with COPIC markers and cut with coordinating dies. Nuvo drops in Ivory Seashell and Spectrum Noir Clear Overlay Sparkle Brush Pen was added to the tiny flowers for some embellishment.

The inside of the card is decorated with matching pattern paper and diecut tiny flowers. Then stamped with “Happy Spring” using Lawn Fawn How You Bean?

Supplies:

Hope you’ve enjoyed this process post and I hope I’ve inspired you to create some cards of your own. Thanks for stopping by and once again please leave questions in the comments or feel free to email me if you prefer.

DIY Projects, Holidays, St. Patrick's Day

St. Patrick’s Day Wreath

Happy Friday everyone. I don’t know about you but we are starting to get ready for spring in my house. And with Spring comes green…and lots of it. So let’s start it off by celebrating St. Patrick’s Day! My husband is Irish and so I like to put up decorations for the holiday. Since I don’t have one yet, I made a wreath for the front door. My neighbors must think I’m crazy about holidays or just plain crazy because I’ve had a different wreath and welcome mat for every holiday since we moved in last September. LOL

St. Patrick’s Day Wreath
St. Patrick’s Day Wreath_Hat Detail
St. Patrick’s Day Wreath_closeup
St. Patrick’s Day Wreath_ closeup 2
St. Patrick’s Day Wreath_closeup 3
St. Patrick’s Day Wreath_closeup 4

Supplies:

Thanks for stopping by to check out my post. Please feel free to leave questions or comments about any of the products listed above or feel free to email me if you prefer.